Toys > Swings & Slides > Heavy Duty Tire Swivel-Commercial

Heavy Duty Tire Swivel-Commercial

Item# 0281-A127

Regular Price: $184.05

Today's Price: $158.66

Availability: Usually ships in 2-3 business days


Heavy Duty Tire Swivel-Commercial

This heavy duty tire swivel has universal joints covered with a rubber boot for finger protection.It will turn 360 degrees with less tangling or wrapping the chains.Painted with rust proof enamel in black.The plate is 8 1/16" x 4" with two 1/2" holes that are 6 1/8" center to center.The swivel is 10.5" in overall length.It hangs down 10 1/4" from pipe.You can use the H140 - H150 or the H172 for this.Nuts and bolts not included.This product should last 2 years in harsh conditions and up to 5 years in optimal conditions.Some conditions may require replacement sooner.7.6 lbs.each.Tensile strength 17000 lbs.

Installation, Safe Use and Maintenance Instructions

Installation: Our parts are sold as either replacement parts or components of a set, unless you are buying our Metal Frame Set, therefore these parts need to be installed according to the sets installation instructions.

Grease the Tire Swivel before using.Tire Swivel must be installed in a bay without any other components.For tire swings, extend surfacing in a circle whose radius is equal to the height of the suspending chain or rope, plus 6 feet in all directions.Place tire swivel on wood beam and mark holes with pencil or pen on wood.Drill two 1/2" holes.Then, bolt tire swivel to wood beam with 1/2" bolts with the length depending on thickness of the wood, plus two flat washers, one on top and one on the bottom of the bolts and secure with a 1/2" nylock nut.(Bolt, washers and nuts are not included.) Put bolts and washers through beam so that nuts are on the bottom of top beam, and so that the bolt is attached with no more than two thread showing beyond the nut.This will prevent a protrusion on the top beam.You will need to use S-hooks or H shackles from the chain to the swivel.Make sure the S-hooks are closed to within .04 to meet Astm safety standards.To do this you will need to use our S-hook pliers or a regular pair of channel lock pliers.Close according to Fig A1.19 for Fastening Devices.Warning: Once the S-hooks have been opened they will have to be replaced to avoid injuries from coming open and/or breaking.Make sure that if you are using shackles they are also tightened correctly.No bolts should protrude over two threads past its nut.

Safe Use: This is for children 2 - 12 years old only.Adults should supervise children at all times.Do not allow children to use unsafely.Do not allow it to be used if damaged.

Maintenance: Do the following to reduce the chance of serious injuries.At beginning and end of each play season and once a month during play season, check for rusty or worn chain.Carefully check hole around fasteners to look for wear.Check for vandalism.Check to make sure s hooks and/ or H-shackles are closed properly.Check spinning action and make sure there is no binding, and using a grease gun put a sufficient amount of standard grease into the swivel through the grease fitting.You will see the grease come out when it is full.We have used a McKay Molybdenum Disulfide grease cartridge, but any standard grease cartridge from any auto part store should be sufficient.There are two grease fittings that must be checked and filled with grease during maintenance.The first is at the bottom of the hanger in the swivel head and is easily seen and reached.The other grease fitting is harder to reach, and is located under the rubber boot on the universal joint.However, it is important that this grease fitting be checked also.To do this: Cut the zip tie holding the rubber boot.Take two flat head screw drivers and lift the boot down, so that you can put the grease gun nozzle on the grease fitting.Put in sufficient grease.Raise up the rubber boot and secure with another zip tie.Cut off excess plastic tail on zip tie.Make sure all nuts and bolts are secure and not worn.Look for loose parts, torn or missing rubber boots, cracks in metal or rust.Replace parts necessary for safe use.Maintain detailed inspection and maintenance records for public-use playground equipment.Maintain detailed inspection and maintenance records for public-use playground equipment.

Any damage from vandalism, abuse or misuse Voids all warranties.

Click Image to Browse Print Catalog Page:
Heavy Duty Tire Swivel-Commercial - A127 - Toys Swings & Slides
100% Satisfaction Guarantee: At Mansion Athletics, we want to be sure that the item you choose is the right one for you. Within 30 days of delivery of your order, you may return any merchandise purchased from Mansion Athletics in its original condition with your email order confirmation or packing slip. Restocking fees may apply. On items over $275 shipping within the US, we will even arrange free pick up or pay for returns shipping.